Pipeline Plugging Airbags are specialized tools for flexible sealing, using high-strength fiber fabric as the pressure bearing skeleton, wrapped with high-quality synthetic rubber on the outer layer, and formed by high-temperature vulcanization. They have strong overall sealing and stable compressive performance. This product focuses on multi specification and multi scenario adaptation, and is mainly used in municipal water supply and drainage, sewage, culvert and other pipeline engineering. It is responsible for sealing operations such as water interruption, plugging, dredging, and maintenance, and is a practical substitute for traditional brick masonry and steel plate sealing solutions on construction sites.
When using Pipeline Plugging Airbags, simply inflate the inside of the airbag to fit the inner wall of the pipeline and quickly achieve a sealed seal; After the construction is completed, the air will be released and contracted, making it easy to extract and recycle without the need for complex disassembly processes. Whether it is pipelines of different diameters and construction positions, the corresponding models can achieve tight sealing and easy disassembly, especially suitable for emergency pipeline repair and segmented renovation projects, greatly improving overall construction efficiency.
• ປະສິດທິພາບການຜະນຶກໄວແລະບໍ່ຊັກຊ້າໃນການກໍ່ສ້າງ: on-site inflation can quickly complete the sealing, and air release can be recycled and reused, saving the tedious process of traditional sealing. A single person can operate with a simple inflation pump, effectively shortening the construction period of pipeline repair and dredging, and reducing construction waiting time.
• ທົນທານຕໍ່ວັດສະດຸ ແລະ ທົນທານ, ມີຄວາມເຂັ້ມແຂງ reusable: Made of thickened synthetic rubber and multiple layers of fiber reinforcement, the airbags have excellent air tightness, compression and wear resistance, as well as aging and corrosion resistance. With standardized operation and proper maintenance, pipeline plugging airbags can be repeatedly used, significantly reducing the cost of construction consumables.
• ປັບຕົວເຂົ້າກັບທໍ່ປະເພດຕ່າງໆ, ໂດຍບໍ່ຈຳກັດສະຖານະການ: Whether it's cement pipes, steel pipes, PVC plastic pipes, rainwater pipes, sewage pipes, or water culverts, as long as they match the corresponding diameter, they can achieve seamless sealing without being limited by construction sites or pipeline materials, and are widely applicable in various scenarios.
• ເກນການເຮັດວຽກຕໍ່າ, ບໍ່ມີຄວາມກັງວົນ ແລະປະຫຍັດແຮງງານ:ບໍ່ຈໍາເປັນຕ້ອງມີອຸປະກອນການກໍ່ສ້າງແບບມືອາຊີບແລະການຝຶກອົບຮົມດ້ານວິຊາການທີ່ສັບສົນ, ເຖິງແມ່ນວ່າຜູ້ເລີ່ມຕົ້ນສາມາດເລີ່ມຕົ້ນໄດ້ໄວໃນການດໍາເນີນງານ. ບໍ່ວ່າຈະເປັນການປະທັບຕາຊົ່ວຄາວ, ການສ້ອມແປງສຸກເສີນຫຼືການບໍາລຸງຮັກສາປົກກະຕິ, ມັນສາມາດຄວບຄຸມໄດ້ງ່າຍ, ປະຫຍັດແຮງງານແລະຄ່າໃຊ້ຈ່າຍໃນການເຊົ່າເຄື່ອງຈັກ.
• ເປັນມິດກັບສິ່ງແວດລ້ອມ ແລະ ບໍ່ມີສານຕົກຄ້າງ, ການກໍ່ສ້າງທີ່ປອດໄພກວ່າ: The sealing process has no leakage, no odor pollution, will not scratch or damage the inner wall of the pipeline, and will not affect the surrounding environment. After demolition, there are no remnants, fully meeting the standard requirements of municipal engineering environmental protection construction.
As the source manufacturer, we directly supply various Pipeline Plugging Airbags, with regular stock specifications available for quick delivery; At the same time, it supports customizing special-shaped designs according to the actual size of the pipeline and construction requirements. The following are the standard inflation pressures corresponding to commonly used models. During the construction process, it is necessary to strictly control the air pressure and prohibit overpressure operations to ensure construction safety and product service life.
| ຂໍ້ມູນຈໍາເພາະ (ມມ) | ຄວາມກົດດັນອັດຕາເງິນເຟີ້ (Mpa) |
| D300X1000 | 0.045 |
| D400X1000 | 0.040 |
| D500X1000 | 0.031 |
| D600X1000 | 0.028 |
| D700X1000 | 0.027 |
| D800X1000 | 0.026 |
Mastering the correct operation method can not only ensure the sealing effect of pipeline plugging air bags but also effectively extend the product's service life. Based on years of construction experience, the standard construction steps are summarized as follows, which beginners can directly refer to for operation:
1. First, clean the gravel, sludge, and sharp debris on the inner wall of the pipeline to avoid scratching the airbag; Subsequently, place the airbags flat into the pipeline, ensuring that the airbags are placed upright, without distortion or wrinkles, and aligned with the section that needs to be sealed to ensure subsequent sealing.
2. Connect the inflation pump tightly to the airbag intake valve, slowly inflate compressed air, and monitor the pressure value in real time with a pressure gauge throughout the process. Once the corresponding standard air pressure is reached, immediately stop inflating and close the intake valve to prevent damage to the airbag caused by high air pressure.
3. Check the inflation status of the airbag by standing still, confirm that the airbag is firmly attached to the pipe wall and tightly sealed, and then carry out subsequent construction such as pipeline maintenance, dredging, and water cut-off; During the construction process, it is strictly prohibited for vibrating rods or sharp tools to directly collide or scratch the surface of the airbag.
4. After all construction is completed, open the intake valve and slowly release air. Do not release air quickly, which may damage the airbag; After the airbag has fully contracted and softened, smoothly extract it from the pipeline, clean the surface stains and impurities with clean water, and store it properly for future reuse.
ການບໍາລຸງຮັກສາປະຈໍາວັນທີ່ເຫມາະສົມຂອງຖົງລົມນິລະໄພສຽບທໍ່ທໍ່ສາມາດຫຼຸດຜ່ອນຄວາມເປັນໄປໄດ້ຂອງຄວາມເສຍຫາຍແລະຍືດອາຍຸການບໍລິການຂອງພວກເຂົາຢ່າງມີປະສິດທິພາບ. ເພື່ອຕອບສະຫນອງຄວາມຕ້ອງການບໍາລຸງຮັກສາຂອງຫນ່ວຍງານກໍ່ສ້າງ, ການເກັບຮັກສາການປະຕິບັດແລະການລະມັດລະວັງການບໍາລຸງຮັກສາໄດ້ຖືກສະຫຼຸບ:
1. After each use, rinse the mud and dirt on the surface of the airbag with clean water in a timely manner, and place it in a cool and ventilated place to dry thoroughly. It is strictly prohibited to expose it to sunlight or rain, and it should be kept away from chemical corrosion such as oil stains, acid and alkali to prevent rubber aging and cracking.
2. ເວລາເກັບມ້ຽນ, ແນະນຳໃຫ້ວາງຮາບພຽງ ຫຼື ແຂວນໄວ້ເພື່ອເກັບມ້ຽນ, ຫຼີກລ່ຽງການພັບ ແລະ ບີບອັດ, ບີບອັດຂອງໜັກ, ແລະ ຮັກສາໄວ້ຫ່າງຈາກຂອງມີຄົມ ເຊັ່ນ ຕະປູ ແລະ ເຫຼັກກ້າ ເພື່ອບໍ່ໃຫ້ພື້ນຜິວຂອງຖົງລົມນິລະໄພຖືກຂູດ ຫຼື ຮົ່ວ.
3. If there are minor issues such as slight air leakage or detachment of sealing film in Pipeline Plugging Airbags, professional repair can be carried out; After the repair is completed, it is necessary to conduct water and air pressure tests to confirm that there is no leakage or damage, and then put it back into construction use.
1.What ສະຖານະການກໍ່ສ້າງທໍ່ Airbags ສຽບທໍ່ທີ່ເຫມາະສົມສໍາລັບການ?
Pipeline Plugging Airbags are mainly used for scenarios such as water supply and drainage pipelines, sewage pipelines, and water conveyance culverts, emergency repairs, dredging and reconstruction, and segmented pressure testing. The circular diameter has the best adaptability and more stable sealing effect.
2.ຂ້ອຍຄວນເຮັດແນວໃດຖ້າຖົງລົມນິລະໄພທີ່ສຽບທໍ່ທໍ່ນັ້ນມີອັດຕາເງິນເຟີ້ ແລະເກີດຄວາມກົດດັນເກີນ?
Overpressure inflation can easily lead to the rupture of the rubber layer and damage to the internal fiber skeleton, which is highly likely to be irreparable and unusable; Once overpressure is detected, immediately stop inflating and slowly deflate to the standard pressure value. Construction with overpressure is strictly prohibited.
3.Can ເສັ້ນຜ່າສູນກາງຂອງທໍ່ທີ່ບໍ່ແມ່ນມາດຕະຖານສາມາດປັບແຕ່ງໄດ້ກັບທໍ່ສຽບ airbags?
Customization is possible by providing key parameters such as pipeline inner diameter, length, and construction pressure. Manufacturers can process pipeline plugging airbags according to their needs, ensuring the adhesion between the airbag and the pipe wall, guaranteeing the sealing effect and safety of use.
4.ຖົງລົມນິລະໄພເຫຼົ່ານີ້ສາມາດໃຊ້ໄດ້ຈັກເທື່ອ?
Under the premise of standardized operation, proper storage, and timely repair of minor damages, the airbags can be reused dozens of times, and their service life mainly depends on the construction environment and the degree of operation standardization. Avoiding sharp and hard objects, preventing overpressure, and significantly extending the number of uses.
5. ອຸນຫະພູມຕໍ່າໃນລະດູຫນາວຈະມີຜົນກະທົບຕໍ່ການນໍາໃຊ້ບໍ?
This product is made of weather resistant rubber material and can be used normally in normal low temperature environments. By avoiding bending and exposure to extreme low temperatures for a long time, the elasticity and airtightness can be ensured without being affected, and the sealing effect remains stable.
6. ເວລາເລືອກຄວນສັງເກດຫຍັງ?
Before making a purchase, accurately measure the inner diameter of the pipeline and match it with the corresponding specifications; At the same time, strictly control the inflation pressure according to the product parameters, and try to choose products from legitimate source manufacturers for better quality and after-sales support, avoiding the impact of inferior airbags on construction.
ທີ່ຢູ່
No. 60, Kongquehe Fourth Road, Clothing Industrial Park, Jimo District, Qingdao City, Shandong Province, ຈີນ
ອີເມລ
